This pressure-sensitive bed alarm by Drive Medical alerts caregiver whenever a patient rises from a chair. The pressure-sensitive pad connects to the audio alarm, which features a safety alert, On/Off switch and low battery warning. Four AA batteries are included to operate the alarm. The chair-sized pad is 11" x 30".
Secure SWCB-2S Wireless Two Patient Call Button and Caregiver Pager Nurse Alert System - 500+ ft Range - Elderly, Disabled, Bedridden Help and Emergency Safety Aid
Includes 2x Patient Call Buttons, 1x Caregiver Receiver, and screwdriver to install call button batteries. (Batteries not included. Requires 3x AAA batteries, 2x CR2032 batteries) The Secure Wireless Remote Nurse Alert System is backed by the exclusive Personal Safety Corporation one year full-replacement warranty and exceptional customer service! Don't be fooled by the imitators; Trust in a brand that has been serving concerned care facilities and individuals since 1991! We guarantee your complete satisfaction. All Secure Call Button Alert systems are FCC compliant, unlike nearly all similar call button systems available. PSC is devoted to being your Patient-Centered, Solutions-Based, Cost-Effective partner for ALL your fall management and patient safety product needs. We pride ourselves on focusing our complete attention on exceeding the expectations of our valued customers with the industry's most complete line of high quality fall management and patient safety products. Our products have assisted in reducing falls in thousands of nursing homes and hospitals throughout the U.S., Canada & Europe. PAIRING INSTRUCTIONS FOR CALL BUTTONS AND RECEIVER: 1. Press receiver "Signal" button until LED lights turn on 2. Press red and blue call buttons one at a time to pair with receiver (be sure to first remove plastic battery protector tabs by opening the call buttons with included screwdriver) 3. LED lights will flash to confirm successful pairing 4. Receiver will automatically exit pairing mode 5. System is ready to use. Repeat process if call button and receiver lose connection
Once the magnetic pull-switch is removed, the alarm sounds on this tamper-proof pull-cord alarm by Drive Medical. The pull-switch, which includes a convenient On/Off switch, activates from any direction and adapts to various situations with a cord that adjusts from 28" to 58". The unit mounts easily on a bed or wheelchair - even on a patient's clothes thanks to an alligator clip. Volume adjusts from 97 to 103 dB on the alarm, which requires one 9V battery (included).
Smart Caregiver BC1-SYS Fall Prevention Monitor Caregivers use these fall prevention devices to know when a resident is attempting to exit a chair without assistance. The chair alarm will sound an alert for a caregiver when a resident's weight is removed from the chair sensor pad. To silence the exit alarm, the caregiver can press the reset button on the side of the chair exit alarm monitor or reapply weight to the chair sensor pad. Place the chair sensor pad on the seat of a firm chair. The chair sensor pad has a cord that plugs into the exit alarm with a phone-like clip. Run the cord through the back of the chair, the alarm can be positioned on the back of the chair by using the metal clip or the adjustable strap. The chair exit alarm monitor has an adjustable volume, low battery light and uses a 9-volt battery (not included) or add the AC-02 power adapter (sold separately) The bed sensor pad is made of soft vinyl, easy to wipe clean, incontinence resistant and measures 10"x15" One year manufacturer warranty.